5-AXIS MACHINING CENTERS
| DECKEL MAHO DMU80FD | |||
|---|---|---|---|
| Manufacturer: | DECKEL MAHO | Model: | DMU80FD |
| Inventory Number: | 063965 | Year: | 2003 |
| Status: | Available | Date Sold: | -- |
| Location: | In Plant Under Power | Number of Axis: | 5-Axis Simultaneous |
| Tool Changer: | 30 ATC | Control: | Millplus iT |
| Spindle: | 12,000 rpm | Spindle Taper: | HSK-A 63 |
| X Axis: | 31.5" (800 mm) | A Axis: | -- |
| Y Axis: | 27.6" (700 mm) | B Axis: | 0-180 degrees |
| Z Axis: | 23.6" (600 mm) | C Axis: | 360 x 0.001 degrees |
5-AXIS MACHINING CENTERS
DMU80FD
SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:
One used 2003 DECKEL MAHO DMU80FD hi-dyn 5-AXIS MILL-TURN CENTRE:
Made in Pfronten, Germany
This machine is capable of simultaneous 5-axis and 5-sided machining
because of the universal swivel head which moves continuously between
vertical and horizontal spindle positions. The turning feature of this
machine is ideal for large and heavy parts.
Power On Hours........................ Only 27,194 total power on hours
Spindle Hours Only 9,898 original spindle on hours before spindle rebuild
NOTE SPINDLE WAS REBUILT BY SETCO 12/2013 AT A COST OF $17,000.00 !
Spindle Hours since rebuild.................... Approximately 200 hours
Millplus iT CNC Control with electronic handwheel
-WORKING RANGE-
X axis (longitudinal)................................... 31.5" (800 mm)
Y axis (transverse)..................................... 27.6" (700 mm)
Z axis (vertical)....................................... 23.6" (600 mm)
Volume machining area......................................... 336 dm-3
-MAXIMUM WORKPIECE CONTOUR FOR ROTATION-SYMMETRICAL PARTS-
Maximum diameter........................................ 36.2" (920 mm)
Maximum weight...................................... 1,764 lbs (800 kg)
-MILL-TURN TABLE-
NC rotary table clamping surface............... 31.5" diameter (800 mm)
Cross slot/T-slots H7/H12........................................... 14
NC rotary table maximum load........................ 1,764 lbs (800 kg)
Table has integrated balancing sensor
Drive power table 40% ED............................... 30.8 HP (23 kW)
Maximum table speed turning.................................... 500 RPM
Maximum torque 100% ED.......................... 1,180 lb/ft (1,600 Nm)
Maximum holding momentum 100% ED................ 3,688 lb/ft (5,000 Nm)
Rotation range of table............ 360 x 0.001 degrees (full 4th axis)
-5TH AXIS MILLING SPINDLE-
NC Controlled B axis milling head. 2 seconds swivel time Hor.-Vert.
Head swivels from horizontal to vertical & vertical to horizontal position
In addition head has a NC Controlled swivel range from vertical position
0 degrees to the left -7 degrees (in direction of tool magazine) and to
the right to horizontal position +180 degrees=3D187 degrees total swivel
range.
-MAIN SPINDLE DRIVE-
Type............................................. AC controlled/digital
Power 40% duty cycle (S3).............................. 38.9 HP (29 kW)
Power 100% duty cycle (S1)............................. 25.5 HP (19 kW)
Speed range (spindle).................................... 20-12,000 rpm
Maximum spindle torque............................. 95.9 lb ft (130 Nm)
Spindle bearing diameter front/rear............. 3.15"/2.16" (80/55 mm)
Spindle taper.................................................. HSK-A63
Clamping power................................................... 25 kN
-FEED DRIVES-
Type.............................................. Brushless AC/Digital
Feed rate............................... 0.04-590 IPM (1-15,000 mm/min)
Rapid feed (x-y-z)................................ 1,574 IPM (40 m/min)
Acceleration (x-y-z)......................................... 5.0 m/s-2
Feed power (x-y-z)............................................... 10 kN
Ballscrews x/y/z.................................. 40x20/40x20/40x20 mm
-30 POSITION VERTICAL CHAIN TOOL CHANGER-
Number of pockets................................................... 30
Maximum tool weight...................................... 22 lb (10 kg)
Maximum tool diameter without free pockets.............. 3.94" (100 mm)
Maximum tool diameter with free pockets.................. 6.3" (160 mm)
Maximum tool length turning/milling..................... 13.8" (350 mm)
Maximum tool length with breakage control............... 12.2" (310 mm)
-COOLANT PUMP-
Pump output external jets......... 10.6 gallon/minute (40 liter/minute)
Pump pressure external jets........................ 21.76 PSI (1.5 bar)
Pump output chip rinsing........ 47.55 gallon/minute (180 liter/minute)
Tank volume..................................... 158 gallon (600 liter)
-COOLANT THRU THE SPINDLE-
Capacity.......................... 6.07 gallon/minute (23 liter/minute)
Pressure.............................................. 580 PSI (40 bar)
Form............................................. Centre of the spindle
-WEIGHT-
Machine weight with table........................ 19,936 lbs (8.9 tons)
Load on machine base including 2 x workpiece weight 21,728 lbs (9.7 tons)
-EQUIPPED WITH-
Oil & Emulsion mist separator
BLUM Laser tool length measuring and broken tool detection
RENISHAW infrared parts measuring probe
Chip conveyor