VERTICAL MACHINING CENTERS
| +GF+ MIKRON HSM 500 | |||
|---|---|---|---|
| Manufacturer: | +GF+ MIKRON | Model: | HSM 500 |
| Inventory Number: | 064418 | Year: | 2007/8 |
| Status: | Available | Date Sold: | -- |
| Location: | On Our Floor | Number of Axis: | 3-Axis |
| Tool Changer: | 36 ATC | Control: | HH iTNC 530 |
| Spindle: | 42,000 rpm | Spindle Taper: | HSK-E40 |
| X Axis: | 19.7" (500 mm) | A Axis: | -- |
| Y Axis: | 17.7" (450 mm) | B Axis: | -- |
| Z Axis: | 13.8" (350 mm) | C Axis: | -- |
VERTICAL MACHINING CENTERS
HSM 500
SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:
One used 2007/8 +GF+ MIKRON HSM 500 3-Axis High Speed Machining Center:
Built at +GF+ in Nidau, Switzerland 11/2007, first installed new 4/2008
-WORK AREA-
Longitudinal, X......................................... 500 mm (19.7")
Lateral, Y.............................................. 450 mm (17.7")
Vertical, Z............................................. 350 mm (13.8")
-STEP TEC Swiss made SPINDLE-
100-42,000 RPM, HSK-E40 taper.......... 11 kW/4.2 Nm (14.75 hp/3 lb/ft)
-FEED RATE-
Feed rate/Rapid traverse (X,Y)............. 20/40 m/min (787/1,575 IPM)
Feed rate/Rapid traverse (Z)................... 40/40 m/min (1,575 IPM)
-DYNAMIC-
1.7 G
-WORK TABLE-
Clamping surface....................... 550 mm x 450 mm (21.7" x 17.7")
Max table load........................................ 200 kg (441 lbs)
Height of table top front floor......................... 980 mm (38.6")
T-slot on table (nominal size x pitch x quantity)....... 14 x 63 x 7 mm
-OPTIONAL EXTENDED TOOL CHANGER-
Positions................. 36 (Standard on this machine is 18 stations)
-CONTROL-
HEIDENHAIN iTNC 530 with electronic movable handwheel
-DIMENSIONS AND WEIGHT-
Machine dimensions (W x D x H) 1750 x 2250 x 2100 mm (69" x 89" x 83")
Machine weight..................................... 5500 kg (12,125 lb)
-STANDARD EQUIPMENT-
Interface Ethernet
25 GB Harddisk capacity
Machine enclosure with polycarbon
Work area light
Safety switches
Vector drive spindle (high torque)
Rigid tapping
HEIDENHAIN optical linear scales with compressed air protection
Liquid cooled spindle, drives, electrical cabinet
3 user-definable M codes
ITC (Intelligent Thermal Control)
APS (Advanced Process System)
Air gun
-OPTIONS THIS MACHINE HAS-
Laser tool measuring
M&H measuring touch probe
Chip sump with coolant tank and chip flushing pistol
Tool blow-off unit
Oil mist minimum lubrication spray unit
Miscellaneous HSK-E40 tool holders: collet and shrink fit (photo 064418-11)
To the best of our knowledge all details listed above are deemed correct.
It is the Buyer's responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
PURCHASE POINT is Hartland, WI