VERTICAL MACHINING CENTERS
| +GF+ MIKRON HSM 300 MoldMaster | |||
|---|---|---|---|
| Manufacturer: | +GF+ MIKRON | Model: | HSM 300 MoldMaster |
| Inventory Number: | 064372 | Year: | 2008/2009 |
| Status: | Available | Date Sold: | -- |
| Location: | Inventory-Milwaukee, WI | Number of Axis: | 3-Axis |
| Tool Changer: | 35 ATC | Control: | HH iTNC 530 |
| Spindle: | 54,000 rpm | Spindle Taper: | HSK-E32 |
| X Axis: | 14.96" (380 mm) | A Axis: | -- |
| Y Axis: | 15.35" (390 mm) | B Axis: | -- |
| Z Axis: | 10.04" (255 mm) | C Axis: | -- |
VERTICAL MACHINING CENTERS
HSM 300 MoldMaster
SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS
FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:
One used 2008/2009 +GF+ MIKRON HSM 300 MoldMaster 54k RPM VMC:
-HISTORY-
Machine was built at +GF+ in Nidau, Switzerland 12/2008,Install US 1/2009
Axis................................................................. 3
-WORKING RANGE-
X Longitudinal......................................... 380 mm (14.96")
Y Lateral.............................................. 390 mm (15.35")
Z Vertical............................................. 255 mm (10.04")
-FEED DRIVE-
Feed rate X/Y/Z-axis.......................... 10/10/10 m/min (394 IPM)
Maximal rapid feed rate X/Y/Z-axis............ 15/15/15 m/min (590 IPM)
Maximum Acceleration X/Y/Z.............................. 10/10/10 m/s-2
-STEP TEC SWISS MADE SPINDLE-
Spindle speed rate.......................................... 54,000 rpm
Spindle taper.................................................. HSK-E32
Spindle power......................................... 6.5 kW (8.72 HP)
Spindle torque..................................... 3.4 Nm (2.51 lb-ft)
Maximum tool diameter..................................... 8 mm (0.32")
Maximum tool length...................................... 80 mm (3.15")
-WORK TABLE-
Dimensions................................ 410 x 325 mm (16.1" x 12.8")
Maximum table load..................................... 68 kg (150 lbs)
-35 STATION TOOL CHANGER-
Tool magazine taper............................................ HSK-E32
Tool magazine places................................................ 35
-CONTROL-
HEIDENHAIN iTNC 530 with mobile electronic handwheel & APS, ITC SW options
-WEIGHT-
Machine........................................... 2,900 kg (6,393 lbs)
-EQUIPPED WITH-
Completely enclosed machine enclosure
BLUM laser measuring system for tool measurement, wear & breakage control
RENISHAW touchprobe for setup on machine & to check the work results
Preparation for robot automation with automatic sliding side door
Preparation for dust extraction unit
Massive polymer concrete (man made granite) base for the best damping
properties and exceptional thermal stability
Preloaded ballscrews with fine pitch for highest precision
Direct measuring systems (HEIDENHAIN glass scales) with high resolution
Watercooled high frequency spindle with HSK-E32 interface
Minimum lubrication quantity unit for hard milling
Ethernet interface for control
15" TFT color display on control
Overpressure protection on linear scales and spindle
Digital drives technology
User friendly command interface
Price quoted is in US Dollars
Purchase Point is Jackson, WI
Technical specifications are subject to verification by buyer