5-AXIS MACHINING CENTERS
| DMG MORI DECKEL MAHO DMU 40 monoBLOCK | |||
|---|---|---|---|
| Manufacturer: | DMG MORI | Model: | DECKEL MAHO DMU 40 monoBLOCK |
| Inventory Number: | 064231 | Year: | 2010 |
| Status: | Available | Date Sold: | -- |
| Location: | In Plant Under Power | Number of Axis: | Full 5-Axis |
| Tool Changer: | 16 ATC | Control: | HH iTNC 530 |
| Spindle: | 18,000 rpm | Spindle Taper: | HSK-A 63 |
| X Axis: | 17.7" | A Axis: | -- |
| Y Axis: | 15.7" | B Axis: | +30/-95 degrees |
| Z Axis: | 18.9" | C Axis: | 360 x 0.001 degrees |
5-AXIS MACHINING CENTERS
DECKEL MAHO DMU 40 monoBLOCK
SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:
Used 2010 DECKEL MAHO DMG-DMU 40monoBLOCK Full 5-Axis Machining Center:
-HISTORY-
Used 825 hours in an artist's studio to mill aluminum & copper sculptures
Made in Pfronten, Germany, this is a Full 5-Axis Simultaneous machine
Heidenhain iTNC530 CNC control with 15" TFT screen & Electronic Handwheel
-WORKING RANGE-
Traverse path X axis (longitudinal)............................... 17.7"
Traverse path Y axis (transverse)................................. 15.7"
Traverse path Z axis (vertical)................................... 18.9"
-FEED DRIVES-
Type.............................................. Brushless AC/Digital
Rapid traverse linear axes X/Y/Z.................. 1,181 ipm (30 m/min)
-TOOL MAGAZINE-
Application................................................... Vertical
Type of Gripper................................................ Pick Up
Number of Tool Stations............................................. 16
-HEIDENHAIN GLASS SCALES X/Y/Z AXES DIRECT PATH MEASURING SYSTEM-
Input Resolution.............................................. 0.001 mm
-HEIDENHAIN ROTARY ENCODERS B/C AXES DIRECT PATH MEASURING SYSTEM-
Input Resolution.............................................. 0.001 mm
-EQUIPPED WITH-
Fully enclosed protection cabin
NC Rotary Table (C-axis) full 4th axis
Table Clamping Surface............................. 17.7" Diameter
Maximum Table Load...................................... 551.2 lbs
Maximum Table Revolution................................... 60 rpm
18,000 RPM Motor Spindle with Active Cooling
Type of Main Drive.......................... AC controlled digital
Drive Power 100% DC............................... 25.5 HP (19 kW)
Drive Power 40% DC................................ 37.5 HP (28 kW)
Max Spindle Torque 100% DC.................... 60.5 Ft/Lb. (82 Nm)
Max Spindle Torque 40% DC.................... 89.2 Ft/Lb. (121 Nm)
Speed Range......................................... 20-18,000 RPM
Acceleration from 0-18,000 RPM........................ 2.2 Seconds
Number of gear steps......................................... None
Spindle Taper............................................. HSK-A63
Spindle bearing diameter front/rear........ 3.15"/2.36" (80/60 mm)
NC-Controlled Swivel Milling Head (B-Axis) 5th Axis with Active Cooling
Swivel Range 125 Degrees(0 is Vertical/-90 is Horizontal) +30/-95 Degrees
Rapid traverse of the B-Axis is 35 rpm, swivelling time approx. 1.5 sec
158 gallon (600 liter) high pressure coolant tank with paper band filter
580 PSI (40 bar) coolant thru the spindle centre
Chip conveyor
External flood coolant on outside of spindle
14.5 PSI (1 bar) pressure, 10.6 gallon/min (40 l/min) flow rate
Infrared parts measuring touch probe
BLUM Laser tool measuring-tool length & diameter & broken tool detection
NFS-Server software
Cooling by air blast
Spray pistol with pump
Signal lamp with 4 colors
3D quickSET machine kinematics calibration kit
Production package: 580 PSI CTS, Chip Conveyor, Rotoclear window