5-AXIS MACHINING CENTERS
| DMG MORI DECKEL MAHO DMU 125P hi-dyn | |||
|---|---|---|---|
| Manufacturer: | DMG MORI | Model: | DECKEL MAHO DMU 125P hi-dyn |
| Inventory Number: | 064424 | Year: | 2003/4 |
| Status: | Available | Date Sold: | -- |
| Location: | In Plant Under Power | Number of Axis: | 5-Axis |
| Tool Changer: | 30 ATC | Control: | HH MillPlus IT |
| Spindle: | 18,000 rpm | Spindle Taper: | CAT 40 |
| X Axis: | 49.2" (1,250 mm) | A Axis: | -- |
| Y Axis: | 34.6" (880 mm) | B Axis: | -7 to +180 degrees |
| Z Axis: | 31.5" (800 mm) | C Axis: | 360 x 0.001 degrees |
5-AXIS MACHINING CENTERS
DECKEL MAHO DMU 125P hi-dyn
One used 2003/4 DMG MORI DECKEL MAHO DMU 125P hi-dyn 5-Axis Universal Machining Center:
May be inspected under power in USA plant under power by appointment.
Machine was built at DECKEL MAHO Pfronten GmbH in Pfronten,Germany 11/2003
First Installed New in the USA................................. 01/2004
HEIDENHAIN MillPlus iT 3-D control with 15" TFT flat screen and Electronic Handwheel. Highlights:
-Easy to operate
-Contour programming
-Measuring cycles
-Fast batch processing
-Increased operator comfort through familiar DIN-ISO programming
-Clear layout of the graphic user-interface
-DECKEL MAHO spindle sensor technology
-WORKING RANGE-
X axis (longitudinal)................................. 49.2" (1,250 mm)
Y axis (transverse)..................................... 34.6" (880 mm)
Z axis (vertical)....................................... 31.5" (800 mm)
-MAXIMUM WORKPIECE DIMENSIONS-
Maximum workpiece diameter............................ 47.2" (1,200 mm)
Maximum workpiece height............................. 59.06" (1,500 mm)
Maximum workpiece weight.......................... 4,409 lbs (2,000 kg)
-NC ROTARY TABLE full 4TH AXIS (C-AXIS)-
Clamping surface 49.2" diameter x 39.4" (1,250 mm diameter x 1,000 mm)
Maximum table load (centered)..................... 4,400 lbs (2,000 kg)
Maximum torque (40% ED)......................... 3,872 ft/lb (5,250 Nm)
Maximum holding momentum (40% ED)............... 3,872 ft/lb (5,250 Nm)
Rapid speed rotary axis (C-axis)................. 15 rpm x 0.001 degree
This is a full 4th axis with Direct Measuring System (HEIDENHAIN encoder)
-NC CONTROLLED 5TH AXIS (UNIVERSAL MILLING HEAD, B-AXIS)-
B axis - NC controlled range up to 187 degrees. From vertical position
0 degrees to the left -7 degrees (in direction of tool magazine) and to
the right to horizontal position +180 degrees=3D187 degrees in total.
-MAIN DRIVE-
Type............................................. AC controlled/digital
Power 40% duty cycle (S3)................................ 37 hp (28 kW)
Power 100% duty cycle (S1)............................... 25 hp (19 kW)
Spindle speed range...................................... 20-18,000 rpm
Acceleration/Deceleration.................................... 2 seconds
Number of gear steps.............................................. None
Maximum spindle torque 40% duty cycle.............. 89.2 ft/lb (121 Nm)
Maximum spindle torque 100% duty cycle............. 60.48 ft/lb (82 Nm)
Spindle bearing diameter front........................... 3.15" (80 mm)
Spindle bearing diameter rear............................ 2.17" (55 mm)
Spindle taper................................................... CAT 40
-FEED DRIVES-
Type.............................................. Brushless AC/Digital
Feed rate (x-y-z)............................ 591 IPM (1-15,000 mm/min)
Rapid feed (x-y-z)................................ 1,575 IPM (40 m/min)
Acceleration (x-y-z)................................... 4.5/3.5/6 m/s-2
Feed power (x-y-z)......................................... 10/10/10 kN
Ball screw (x-y-z)....................................... 40 mm x 20 mm
Ball screw spindle....................................... 50 mm x 20 mm
-30 POSITION TOOL CHANGER-
Magazine type........................ Chain, horizontal, double gripper
Number of pockets................................................... 30
Maximum tool weight................................... 22.05 lb (10 kg)
Maximum tool diameter with no neighbouring empty pockets 3.94" (100 mm)
Maximum tool diameter with neighbouring empty pockets.... 6.3" (160 mm)
Maximum tool length..................................... 17.7" (450 mm)
-HEIDENHAIN GLASS SCALES X/Y/Z AXES DIRECT PATH MEASURING SYSTEM-
Input Resolution.............................................. 0.001 mm
-HEIDENHAIN ROTARY ENCODERS B/C AXES DIRECT PATH MEASURING SYSTEM-
Input Resolution.............................................. 0.001 mm
-EXTERNAL FLOOD COOLANT PUMP-
Pump output external jets pressure.................. 21.7 PSI (1.5 bar)
Pump output external jets flow rate...... 10.6 gallon/minute (40 l/min)
Coolant tank capacity............................... 158 gallon (600 l)
-580 PSI COOLANT THRU THE SPINDLE CENTRE (FORM AD)-
Pump output............................... 6.1 gallon/minute (23 l/min)
Pump pressure......................................... 580 PSI (40 bar)
-EQUIPPED WITH-
Fully enclosed protection cabin
Production Package consisting of:
-Coolant tank 158 gallon (600 l)
-Automatic coolant cleaning through paper band filter
-580 PSI (40 bar) coolant thru the spindle centre (Form AD)
-Rotating clear-view window (in cabin window)
-Chip conveyor with interval control
RENISHAW MP10 Infrared parts measuring probe
BLUM Laser tool measuring-tool length, diameter & broken tool detection
-Automatic retraction of the measuring unit in a protected housing.
-Tool length and diameter measuring in horizontal/vertical position.
Spray pistol with pump, 14.5 PSI/10.4 gallon/min pump performance
To the best of our knowledge all details listed above are deemed correct.
It is the Buyer's responsibility to confirm all details and we encourage
an inspection of the machine(s) and accessories prior to purchase.