5-AXIS MACHINING CENTERS

SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:

One used 2006/8 DMG MORI DECKEL MAHO DMC75V linear 5-Axis simultaneous VMC:

Machine was manufactured at DECKEL MAHO Seebach GmbH-Seebach, Germany     

Machine was first installed new in June 2008                              

May be inspected under power in our Wisconsin showroom by appointment     

-CONTROL-                                                                 

HEIDENHAIN iTNC 530 3-D control with 15" TFT screen & electronic handwheel

-WORKING AREA-                                                            

X-Axis..................................................   34.8" (885 mm)

Y-Axis..................................................   23.6" (600 mm)

Z-Axis..................................................   23.6" (600 mm)

Max workpiece size approx. 732 mm dia x 600 mm height x 1,000 kg          

-FEED DRIVES-                                                             

Feed Force X,Y max................................   2,475 lbs (11,000 N)

Feed Force Z max...................................   2,137 lbs (9,500 N)

Feed Range............................   0.04-3,543 IPM (1-90,000 mm/min)

Rapid Traverse X, Y, Z-Axis.......................   3,543 IPM (90 m/min)

-MEASURING SYSTEM-                                                        

Direct, HEIDENHAIN glass scales, input accuracy    3.94" x 10-6 (0.0001 mm)

-WORKING SPINDLE-                                                         

Speed Range, max.........................................   20-18,000 RPM

Power Rating 40% DC....................................   61.7 HP (46 kW)

Power Rating 100% DC.....................................   47 HP (35 kW)

Torque 40% DC........................................   59 Ft/Lbs (80 Nm)

Torque 100% DC.....................................   44.3 Ft/Lbs (60 Nm)

Tool Taper.....................................................   HSK-A63

Tool Clamping Moment..................   4.05-5,175 lbs (18,000-23,000 N)

-TOOL CHANGER-                                                            

Tool Taper.....................................................   HSK-A63

Tool magazine number of pockets.....................................   30

Max. tool length..................................................   11.8"

Max. tool diameter............................................   3.1"/5.5"

Chip-to-chip time..............................   Approximately 6 seconds

-B-AXIS MILLING HEAD-                                                     

Pivoting Range B-Axis.................................   +10/-110 Degrees

Maximum Turning Acceleration..........   3,200 degrees per second squared

Maximum Turning Speed...........................................   50 RPM

Maximum Turning Torque (Clamping Opened)...........   553 Ft/Lbs (705 Nm)

Rated Load Torque (Clamping Opened)................   346 Ft/Lbs (470 Nm)

Clamping Moment (Hydraulic Clamping).............   885 Ft/Lbs (1,200 Nm)

-C-AXIS NC-ROTARY TABLE-                                                  

Clamping Area with T-Slots DIN 650-14...................   29.5" (750 mm)

Loading Height (upper edge of table)....................   35.4" (900 mm)

Maximum Height of Work Piece............................   23.6" (600 mm)

Rotary Range of C-Axis.....................................   360 degrees

Maximum Turning Acceleration................   3,200 degrees per second-2

Maximum Turning Speed..........................................   100 RPM

Maximum Turning Torque (Clamping Opened)......................   1,500 Nm

Rated Load Torque (Clamping Opened)...........................   1,000 Nm

Clamping Moment (Hydraulically Clamped).......................   3,000 Nm

Maximum Table Load at 100 RPM......................   1,764 lbs. (800 kg)

Max Table Load at 10 RPM (only for positioning mode)    2,205 lbs. (1,000 kg)

-COOLANT UNITS-                                                           

Pump Capacity/outside Tool Cooling    33.4 PSI (2.3 bar), 5.3gal/min(20l/min)

Pump Capacity for Bed Flushing    33.4 PSI (2.3 bar), 26.4gal/min (100l/min)

Pump Capacity of COOLANT THRU THE SPINDLE    580 PSI (40 bar), 6.1gal/min

-EQUIPPED WITH-                                                           

BLUM Laser Tool Measuring                                                 

HEIDENHAIN TS 640 Infrared Parts Measuring Probe                          

Production Package I:                                                     

     Coolant Thru the Spindle form A-D 580 PSI/40 Bar, 6.1gal/min(23l/min)

     259 Gallon (980 l) High Pressure Coolant Tank                        

     Paper Band Filter                                                    

     Rotating Clear View Window                                           

     Spray-Gun                                                            

SIEMENS Linear Drives                                                     

HEIDENHAIN Inverter Unit                                                  

Preparation handling system EROWA