5-AXIS MACHINING CENTERS
| DMG MORI DECKEL MAHO DMU60 monoBLOCK | |||
|---|---|---|---|
| Manufacturer: | DMG MORI | Model: | DECKEL MAHO DMU60 monoBLOCK |
| Inventory Number: | 064373 | Year: | 2006 |
| Status: | Available | Date Sold: | -- |
| Location: | On Our Floor | Number of Axis: | 5-Axis |
| Tool Changer: | 24 ATC | Control: | HH iTNC 530 |
| Spindle: | 18,000 rpm | Spindle Taper: | CAT 40 |
| X Axis: | 28.74" (730 mm) | A Axis: | -- |
| Y Axis: | 22.05" (560 mm) | B Axis: | -120.100/+30.100 degrees |
| Z Axis: | 22.05" (560 mm) | C Axis: | 360 x 0.001 degrees |
5-AXIS MACHINING CENTERS
DECKEL MAHO DMU60 monoBLOCK
SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:
Used 2006 DMG MORI DECKEL MAHO DMU60monoBLOCK 5-Axis simultaneous VMC:
Machine was manufactured at DECKEL MAHO Pfronten GmbH-Pfronten, Germany May be inspected under power in our Wisconsin showroom by appointment -CONTROL-
Heidenhain iTNC 530 3-D control with 15" TFT screen & Electronic Handwheel -WORK AREA-
Traverse path X (longitudinal)......................... 28.74" (730 mm)
Traverse path Y (across)............................... 22.05" (560 mm)
Traverse path Z (vertical)............................. 22.05" (560 mm)
Max workpiece size 26.77" (680 mm) dia x 29.53" (750 mm) height x 1,102lbs
-FEED DRIVES-
Type.............................................. Brushless AC/Digital
Rapid traverse linear axes X/Y/Z.................. 1,181 ipm (30 m/min)
Ballscrews X/Y/Z...................... 40 x 20 mm/40 x 20 mm/50 x 20 mm
-TOOL MAGAZINE-
Application................................................... Vertical
Type of Gripper................................................ Pick Up
Number of Tool Stations............................................. 24
Max Tool Weight........................................ 17.6 lbs (8 kg)
Max Tool Diameter without free side pockets.............. 3.15" (80 mm)
Max Tool Diameter with free side pockets................ 5.12" (130 mm)
Max Tool Length......................................... 12.4" (315 mm)
-HEIDENHAIN GLASS SCALES X/Y/Z AXES DIRECT PATH MEASURING SYSTEM-
Input Resolution.............................................. 0.001 mm
-HEIDENHAIN ROTARY ENCODERS B/C AXES DIRECT PATH MEASURING SYSTEM-
Input Resolution.............................................. 0.001 mm
-EQUIPPED WITH-
Fully enclosed protection cabin
Integrated Rotary Table
Table Clamping Surface................... 23.62" (600 mm) Diameter
Maximum Load Table Center...................... 1,102 lbs (500 kg)
Rigid Table Clamping Surface.... 39.4" x 23.6" (1,000 mm x 600 mm)
Rigid Table maximum load....................... 1,543 lbs (700 kg)
18,000 RPM Motor Spindle with Active Cooling
Type of Main Drive............................................. AC
Drive Power 100% DC............................... 25.5 HP (19 kW)
Drive Power 40% DC................................ 37.5 HP (28 kW)
Max Spindle Torque 100% DC.................... 60.5 Ft/Lb. (82 Nm)
Max Spindle Torque 40% DC.................... 89.2 Ft/Lb. (121 Nm)
Speed Range......................................... 20-18,000 RPM
Acceleration from 0-18,000 RPM........................ 2.2 Seconds
Number of gear steps......................................... None
Spindle Taper............................................... CAT40
Spindle bearing diameter front/rear........ 3.15"/2.36" (80/60 mm)
NC-Controlled Simultaneous Swivel Milling Head(B-Axis) with Active Cooling
Swivel Range (0 is Vertical/-90 is Horizontal) -120.100/+30.100 Degrees
HEIDENHAIN TS649 infrared parts measuring touch probe
Chip auger
External flood coolant on outside of spindle
1 bar (14.5 PSI) pressure, 40L/Min (10.6 gallon/min) flow rate
250L (66 gallon) capacity coolant tank