5-AXIS MACHINING CENTERS

DMG MORI DECKEL MAHO HSC 55 linear
Manufacturer: DMG MORI Model: DECKEL MAHO HSC 55 linear
Inventory Number: 064374 Year: 2008
Status: Available Date Sold: --
Location: In Plant Under Power Number of Axis: 5-Axis
Tool Changer: 30 ATC Control: HH iTNC 530
Spindle: 18,000 rpm Spindle Taper: HSK-A63
X Axis: 17.7" (450 mm) A Axis: +10/-110 degrees
Y Axis: 22.8" (580 mm) B Axis: --
Z Axis: 15.7" (400 mm) C Axis: 360 x 0.001 degrees

5-AXIS MACHINING CENTERS
DECKEL MAHO HSC 55 linear


SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS
FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:
One used 2008 DMG MORI DECKEL MAHO HSC 55 linear 5-Axis Machining Center:

 

 
                                                                          
See VIDEO of 110 rpm Rotary Swivel Table at:                              
http://youtu.be/qz5ssQqXaVg                                               
                                                                          
See VIDEO of 5-Axis High Speed Cutting on a HSC55 at:                     
http://youtu.be/MwZCuTlSKeY                                               
                                                                          
May be inspected in US plant under power by appointment                   
                                                                          
Machine was made at Deckel Maho Seebach GmbH in Seebach, Germany          
                                                                          
Original Build Date............................................   07/2008
                                                                          
Hours    Approx 7,027 spindle on hours TOTAL over the LIFE of the machine
                                                                          
TECHNICAL DATA:                                                           
HSC-Precision Centre HSC 55 linear in Bridge Type design                  
                                                                          
NEW DMG Design                                                            
                                                                          
CONTROL:                                                                  
3D-Control Heidenhain iTNC 530                                            
Operator screen SmarT.NC                                                  
DMG ERGOline Control, 19" display                                         
Options on the control:                                                   
 Electronic handwheel                                                     
 Ethernet Data lines and adapter                                          
 Application Tuning Cycle ATC-Software selection of the optimal milling   
  mode for the current machining                                          
                                                                          
-MAXIMUM WORKPIECE DIMENSIONS-                                            
Maximum workpiece diameter..............................   17.7" (450 mm)
Maximum workpiece height................................   13.8" (350 mm)
Maximum workpiece weight............................   440.9 lbs (200 kg)
                                                                          
WORKING AREA:                                                             
X-Axis..................................................   17.7" (450 mm)
Y-Axis..................................................   22.8" (580 mm)
Z-Axis..................................................   15.7" (400 mm)
C-Axis..........................   360 degrees Rotation Range (110 rpm !)
A-Axis......................   +10/-110 degrees Tilting range (110 rpm !)
Distance spindle nose to table..............   4.1"-19.8" (105 mm-505 mm)
Clamping area trunnion table...........   15.7" x 15.7" (400 mm x 400 mm)
Maximum table load....................................   440 lbs (200 kg)
Table has absolute measuring systems including permanent cooling of A and 
C-axis motors                                                             
                                                                          
MAIN DRIVE:                                                               
Drive...............................   Digital controlled AC-Motorspindle
Spindle speed range......................................   20-18,000 rpm
Spindle taper........................................   HSK-A63 DIN 69893
Spindle power 40/100% DC...............   54.98 hp/40.23 hp (41 kW/30 kW)
                                                                          
TOOL MAGAZINE:                                                            
Chain with double gripper with linear axis for pickup-change              
Tool changer and tool magazine integrated in machine cabin                
Magazine places.............................................   30 pockets
Maximum tool diameter......   3.14" (80 mm) with free neighboring pockets
Maximum tool length.....................................   9.84" (250 mm)
Maximum tool load......................................   13.2 lbs (6 kg)
                                                                          
FEED DRIVES:                                                              
Drive.....   Linear motors in X, Y, Z-axis, Torque motors in A and C-axis
Feed rate............   X, Y and Z-axis maximum 3,150 ipm (80,000 mm/min)
Rapid feed......................   X, Y, and Z-axis 262 ft/min (80 m/min)
Rapid feed A-axis..............................................   110 rpm
Rapid feed C-axis..............................................   110 rpm
Acceleration..................................................   Up to 2g
Clamping torque rotary axis....................   1,475 ft/lbs (2,000 Nm)
Clamping torque swivel axis....................   1,475 ft/lbs (2,000 Nm)
                                                                          
GUIDEWAYS:                                                                
Roller guide ways in all linear axis                                      
X-axis....................   Size 1.77" (45 mm), distance 16.53" (420 mm)
Y-axis....................   Size 1.37" (35 mm), distance 35.00" (890 mm)
Z-axis....................   Size 1.37" (35 mm), distance 12.59" (320 mm)
                                                                          
LINEAR MEASURING SYSTEM:                                                  
System..........   Direct absolute X/Y/Z Axis, absolute encoders A/C Axis
Input resolution................................   0.0000039" (0.0001 mm)
                                                                          
MEASURING:                                                                
BLUM Laser Tool Measuring for tool length and diameter                    
                                                                          
Renishaw OMP 60 infrared touch probe                                      
                                                                          
Machine preparation for use of the 3D quickset Toolkit                    
                                                                          
Signal lamp, 4 colours                                                    
                                                                          
COOLING MEDIA/CHIP REMOVAL:                                               
Scraper type chip conveyor, discharge height 37.4" (950 mm)               
                                                                          
High Pressure Air blast through spindle centre, activated by M function   
and softkey, maintained air with a light lubrication                      
                                                                          
Working area flushing, including door flushing pipe, with rotating        
clear-view window                                                         
                                                                          
6 nozzles for outer coolant supply, delivery rate approximately 36.25 psi 
(2.5 Bar) at 10.56 gallon/min (40 l/min).                                 
  Coolant tank capacity 39.62 gallon (150 l)                              
  Coolant-airblast changeover (6 nozzles for coolant, 4 nozzles air blow) 
                                                                          
CENTRAL LUBRICATION:                                                      
Automatic minimum lubrication for roller guideways                        
                                                                          
ELECTRICAL CABINET:                                                       
With active cooling unit                                                  
                                                                          
WORKING HOUR RECORDING:                                                   
On the electrical cabinet for control voltage on and programme run-time   
                                                                          
CABIN:                                                                    
Full cabin with sliding door                                              
DMG LIGHTline provides optimal visibility of the machine status           
                                                                          
MACHINE LAMP:                                                             
Planon-light                                                              
                                                                          
MACHINE WEIGHT:                                                           
Approximately 20,943 lbs (9,500 kg)                                       
                                                                          
EQUIPPED WITH:
Active chiller for main spindle and linear drives                         
                                                                          
Active chiller for electrical cabinet                                     
                                                                          
Direct absolute measuring system with air purge                           
                                                                          
Coolant-airblast changeover                                               
                                                                          
Miscellaneous HSK-A63 tool holders                                        
                                                                          
Technical specifications are subject to verification by Buyer.            
APPROXIMATE WEIGHT 20943#