5-AXIS MACHINING CENTERS
| DMG MORI DECKEL MAHO DMU 50 eVo linear | |||
|---|---|---|---|
| Manufacturer: | DMG MORI | Model: | DECKEL MAHO DMU 50 eVo linear |
| Inventory Number: | 064122 | Year: | 2007 |
| Status: | Available | Date Sold: | -- |
| Location: | In Plant Under Power | Number of Axis: | 5-Axis |
| Tool Changer: | 30 ATC | Control: | HH iTNC 530 |
| Spindle: | 18,000 rpm | Spindle Taper: | CAT 40 |
| X Axis: | 19.7" (500 mm) | A Axis: | -- |
| Y Axis: | 17.7" (450 mm) | B Axis: | 0-108 degrees |
| Z Axis: | 15.7" (400 mm) | C Axis: | 0-360 degrees |
5-AXIS MACHINING CENTERS
DECKEL MAHO DMU 50 eVo linear
SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS
FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:
Used 2007 DMG MORI DECKEL MAHO DMU 50 eVo linear 5-Axis Simultaneous VMC:
Made was made at DECKEL MAHO Seebach GmbH in Seebach, Germany
-CONTROL-
Heidenhain iTNC530 CNC with 15" TFT flatscreen & Electronic Handwheel
-WORK AREA-
Traverse path X (longitudinal).......................... 19.7" (500 mm)
Traverse path Y (across)................................ 17.7" (450 mm)
Traverse path Z (vertical).............................. 15.7" (400 mm)
-MAIN DRIVE-
AC-motor spindle (40/100% DC).................. 46.9/33.5 hp (35/25 kW)
Spindle speed............................................ 20-18,000 rpm
Spindle torque (40/100% DC)............... 95.9/64.1 ft lbs (130/87 Nm)
Spindle bearing diameter (front/rear)....................... 3.15"/2.17"
Spindle taper................................................... CAT 40
-FEED DRIVES-
Rapid traverse linear axes X/Y/Z 3,149/1,968/1,968 ipm (80/50/50m/min)
Feed velocity linear axes X/Y/Z................... 787.4 ipm (20 m/min)
Feed power X/Y/Z.................................... 1,124 ft/lb (5 kN)
-TOOL MAGAZINE-
Storage pockets........................................... 30 positions
Maximum tool length..................................... 11.8" (300 mm)
Maximum tool diameter.......................... 3.15"/5.12" (80/130 mm)
Chip-to-chip time............................................ 5 seconds
-NC SWIVEL ROTARY TABLE-
Clamping surface.......................... 19.7" x 15.0" (500 x 380 mm)
Swivel range B-axis...................................... 0-108 degrees
Swivel range C-axis...................................... 0-360 degrees
Rapid traverse swivel axis B.................................... 40 rpm
Rapid traverse rotary axis C.................................... 50 rpm
Maximum table load..................................... 441 lb (200 kg)
Table measuring system.......................................... Direct
Table cooling........................... Drive cooling for B and C axis
-EQUIPPED WITH-
Air spray pistol
Chip conveyor
40 gallon flood coolant tank
Flood coolant 5.2 gal/min @ 36 psi
6 water coolant nozzles, 4 air coolant nozzles
HEIDENHAIN glass scales X/Y/Z axes
HEIDENHAIN rotary encoders B/C axes
5-Axis Simultaneous Movement