5-AXIS MACHINING CENTERS
| DMG MORI DECKEL MAHO DMU50V | |||
|---|---|---|---|
| Manufacturer: | DMG MORI | Model: | DECKEL MAHO DMU50V |
| Inventory Number: | 064344 | Year: | 1997 |
| Status: | Available | Date Sold: | -- |
| Location: | On Our Floor | Number of Axis: | 5-Axis |
| Tool Changer: | 24 ATC | Control: | HH MillPlus |
| Spindle: | 8,000 rpm | Spindle Taper: | CAT 40 |
| X Axis: | 19.7" (500 mm) | A Axis: | -- |
| Y Axis: | 15" (380 mm) | B Axis: | 0-180 degrees |
| Z Axis: | 15" (380 mm) | C Axis: | 360 x 0.001 degrees |
5-AXIS MACHINING CENTERS
DECKEL MAHO DMU50V
SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS
FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:
Used 1997 DMG MORI DECKEL MAHO DMU 50V 5-Axis VMC with CTS:
Machine was built at Deckel Maho Seebach GmbH in Seebach, Germany 11/1997
First installed new 1/1999
Machine was used in a R&D laboratory on jet engine components
....only 15,243 spindle on hours total over the LIFE of the machine!....
-Clamp once, machine 5-Sides-
Table on machine swivels 0-180 degrees and rotates 360 degrees which
allows for 5-Axis machining with one work piece clamping
HEIDENHAIN MillPlus control, V320 SW level, with electronic handwheel
-WORK AREA-
Traverse path X (longitudinal).......................... 19.7" (500 mm)
Traverse path Y (across).................................. 15" (380 mm)
Traverse path Z (vertical)................................ 15" (380 mm)
-MAIN DRIVE-
AC-motor spindle drive power 100% DC................... 13.4 HP (10 kW)
AC-motor spindle drive power 40% DC.................... 20.1 HP (15 kW)
Spindle speed............................................. 20-8,000 rpm
Spindle taper................................................... CAT 40
Number of gear steps.............................................. None
-FEED DRIVES-
Rapid traverse linear axes X/Y/Z.................. 1,181 ipm (30 m/min)
Feed Range linear axes X/Y/Z................ 394 ipm (to 10,000 mm/min)
-TOOL MAGAZINE-
Storage pockets........................................... 24 positions
-FLOOD COOLANT-
Amount of coolant................................. 52.8 gallons (200 l)
Flow rate............................. 5.28 gallon/minute (20 l/minute)
-MEASURING SYSTEM-
Direct, HEIDENHAIN glass scales, resolution 0.00004" for X/Y/Z
HEIDENHAIN direct angle encoders for B & C Axes
-NC SWIVEL ROTARY TABLE-
Clamping surface.......................... 19.7" x 15.0" (500 x 380 mm)
Swivel range 5th (swivel) B-axis......................... 0-180 degrees
Rotation range 4th (rotary) C-axis 0-360 degrees (continous, full 4th)
Maximum table load.................................... 441 lbs (200 kg)
Table measuring system....... Direct path measuring system in both axes
Table cooling....... Drive cooling for B and C axis with heat exchanger
-EQUIPPED WITH-
PRODUCTION PACKAGE consisting of:
580 PSI (40 Bar) Coolant Thru the Spindle
Chip Conveyor
Visiport inspection window on side window of machine
PRICE QUOTED IN US DOLLARS
PURCHASE POINT IS HARTLAND, WI 53029