5-AXIS MACHINING CENTERS
| +GF+ MIKRON Torque RTT UCP 600 Vario | |||
|---|---|---|---|
| Manufacturer: | +GF+ MIKRON | Model: | Torque RTT UCP 600 Vario |
| Inventory Number: | 064335 | Year: | 2008 |
| Status: | Available | Date Sold: | -- |
| Location: | On Our Floor | Number of Axis: | Full 5-Axis |
| Tool Changer: | 30 ATC | Control: | HH iTNC 530 |
| Spindle: | 20,000 rpm | Spindle Taper: | HSK-A63 |
| X Axis: | 23.6" (600 mm) | A Axis: | -- |
| Y Axis: | 17.7" (450 mm) | B Axis: | -101/+45 degrees |
| Z Axis: | 17.7" (450 mm) | C Axis: | 360 x 0.001 degrees |
5-AXIS MACHINING CENTERS
Torque RTT UCP 600 Vario
SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:
One used +GF+ MIKRON Torque RTT UCP 600 Vario 5-Axis Machining Center:
Machine was made in Nidau, Switzerland 2007; first installed new 5/2008
As of 8/2020 only 5,216 Program run and 4,979 Spindle on hours total !
CONTROL
HEIDENHAIN iTNC 530 with Ethernet and electronic handwheel for part setup
-With option Advanced Process System spindle vibration monitoring
WORKING RANGE
Longitudinal X-Axis..................................... 23.6" (600 mm)
Cross Y-Axis............................................ 17.7" (450 mm)
Vertical Z-Axis......................................... 17.7" (450 mm)
B-Axis (Swivel) range................................. -101/+45 degrees
A-Axis (Rotary) range.................................. n x 360 degrees
FEED DRIVE
Feed Rate X/Y/Z..................................... 590 IPM (15 m/min)
Rapid Speed X/Y/Z................................... 866 IPM (22 m/min)
Rapid Speed B-Axis (Swivel)..................................... 80 RPM
Rapid Speed A-Axis (Rotary).................................... 200 RPM
WORKING TABLE
Clamping Surface System 3R MacroMagnum 156 mm (6.14") diameter pallets
Maximum workpiece weight............................... 176 lbs (80 kg)
Max workpiece size using tailstock 300mm (11.8") dia x 450mm (17.7") high
Max workpiece size without tailstock 350mm (13.78")dia x 450mm (17.7")high
Number of pallet stations this machine is equipped with............. 16
All feed motors are liquid-cooled
Direct measuring system HEIDENHAIN rotary encoders
AUTOMATION
Automatic tool changer.................................... 30 positions
BLUM Laser tool measuring system.................... Standard, included
Infrared parts measuring touch probe..................... M&H, included
Automatic pallet changer number of pallet stations.................. 16
WEIGHT
Including pallet changer........... Approximately 16,976 lbs (7,700 kg)
Machine base................................................... Granite
STEPTEC SWISS MADE SPINDLE
Spindle taper.................................................. HSK A63
Spindle RPM................................................. 20,000 RPM
Spindle power 40% ED................................... 40.2 HP (30 kW)
Spindle torque 40% ED............................... 67.1 Ft/Lb (91 Nm)
EQUIPPED WITH:
Direct measuring system HEIDENHAIN glass scales X/Y/Z, Encoders B,C
External spindle chiller
Tool cleaning by air blast
Pallet Changer MacroMagnum 156
Torque RTT torque motor direct drive rotary tilting table
Tailstock for torque tilting table:
The tailstock can be mounted on the rotary tilting table to support
the machining of long and thin work pieces (such as aircraft blades
and blisks). The max. distance between table and tailstock cone point
is 450 mm (17.71"). The stroke of the tailstock is 350 mm (13.77").
The tailstock can be removed if larger work pieces are machined.
210 l (56 gallon) coolant tank with 2.5 bar (36.3 PSI) flood coolant
Pump performance is 30l/min (7.93 gallon/minute)