5-AXIS MACHINING CENTERS
| DMG MORI DECKEL MAHO DMU80P hi-dyn | |||
|---|---|---|---|
| Manufacturer: | DMG MORI | Model: | DECKEL MAHO DMU80P hi-dyn |
| Inventory Number: | 064329 | Year: | 2002 |
| Status: | Available | Date Sold: | -- |
| Location: | On Our Floor | Number of Axis: | 5-Axis |
| Tool Changer: | 60 ATC | Control: | HH MillPlus IT |
| Spindle: | 18,000 rpm | Spindle Taper: | CAT 40 |
| X Axis: | 31.5" (800 mm) | A Axis: | -- |
| Y Axis: | 27.6" (700 mm) | B Axis: | -7.3 to +187.6 degrees |
| Z Axis: | 23.6" (600 mm) | C Axis: | 360 x 0.001 degrees |
5-AXIS MACHINING CENTERS
DECKEL MAHO DMU80P hi-dyn
SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:
One used 2002 DMG MORI DECKEL MAHO DMU80P hi-dyn 5-AXIS Universal Machining Center:
Machine is IN STOCK, fly into Milwaukee, WI (MKE) to inspect
>>**This machine is bank owned, they are OPEN FOR OFFERS**<<
Build Date.......................................... 08/2001 in Germany
First installed new in the USA................................. 02/2002
This machine was made at DMG MORI-Pfronten in Pfronten, Germany
-DESIGN CONCEPT-
This machine is TWO machines in one because of the universal milling head
that swivels from horizontal to vertical position and vice versa. This
allows complete machining in one set-up for up to 5-sides and 5-axes
machining.
-CONTROL-
HEIDENHAIN MillPlus IT with Ethernet & Electronic Handwheel
-WORKING RANGE-
X-Axis (longitudinal)................................... 31.5" (800 mm)
Y-Axis (transverse)..................................... 27.6" (700 mm)
Z-Axis (vertical)....................................... 23.6" (600 mm)
-MAXIMUM WORKPIECE DIMENSIONS-
Maximum workpiece diameter.............................. 36.2" (920 mm)
Maximum workpiece height.............................. 39.4" (1,000 mm)
Maximum workpiece weight............................ 1,760 lbs (800 kg)
-4th AXIS NC ROTARY TABLE-
Clamping surface 35.4" dia x 24.8" (900mm diameter x 630mm front to back)
Maximum table load.................................. 1,760 lbs (800 kg)
Rotation range..................... 360 x 0.001 degrees (Full 4th Axis)
T-slots..................................... 9, 14 H7/63 mm/0.55 H7/2.4
-5th AXIS UNIVERSAL MILLING HEAD WITH CONTROLLED B-AXIS-
This machine is equipped with a universal milling head that swivels from
horizontal to vertical position and vice versa. In addition the milling
head has a controlled B-Axis. Swivel angle from vertical position 0 deg
to the left -7.3 degrees(in direction of tool magazine)and to the right to
horizontal position +180.3 degrees for a total 187.6 degrees swivel range.
This allows complete machining in one set-up for up to 5-sides and 5-axes
machining.
-MAIN SPINDLE DRIVE-
Type............................................. AC controlled/digital
Power 40% duty cycle (S3).............................. 37.5 hp (28 kW)
Power 100% duty cycle (S1)............................. 25.5 hp (19 kW)
Spindle speed range 20-18,000 rpm motor spindle
Number of gear steps.............................................. None
Maximum spindle torque............................... 89 ft/lb (121 Nm)
Spindle bearing diameter front........................... 3.15" (80 mm)
Spindle taper................................................... CAT 40
Automatic swivel horiz/vert.................... Approximately 4 seconds
Retention knob.................................. ISO/DIS 7388/II type B
-FEED DRIVES-
Type.............................................. Brushless AC/Digital
Feed rate.............................. 0.04"-590 IPM (1-15,000 mm/min)
Rapid feed (X/Y/Z)................................ 1,575 IPM (40 m/min)
Acceleration................................................... 5 m/s-2
Feed power (X/Y/Z)............................................... 10 kN
Ballscrew (X/Y/Z)................................. 40x20/40x20/40x20 mm
-60 POSITION TOOL CHANGER-
Magazine type......................... Horizontal chain, double gripper
Number of pockets................................................... 60
Maximum tool weight...................................... 22 lb (10 kg)
Maximum tool diameter with no empty neighboring pockets 3.94" (100 mm)
Maximum tool diameter with empty neighboring pockets..... 6.3" (160 mm)
Maximum tool length..................................... 13.8" (350 mm)
Tool change time............................. Approximately 5.5 seconds
-EXTERNAL FLOOD COOLANT-
External coolant jets pressure...................... 21.7 PSI (1.5 bar)
External coolant jets flow rate.................... 10.6 gpm (40 l/min)
Chip conveyor pump output pressure.................. 21.7 PSI (1.5 bar)
Chip conveyor pump output flow rate................ 15.8 gpm (60 l/min)
Coolant tank capacity............................... 160 gallon (600 l)
-COOLANT THRU THE SPINDLE-
Pump output........................................... 6 gpm (23 l/min)
Pump pressure......................................... 580 PSI (40 bar)
-INSTALLATION-
Compressed air.......................................... 87 PSI (6 bar)
Total weight of machine at base incl. workpiece weight 21,605 lb(9,800 kg)
-HEIDENHAIN GLASS SCALES X/Y/Z AXES DIRECT PATH MEASURING SYSTEM-
Input Resolution.............................................. 0.001 mm
-HEIDENHAIN ROTARY ENCODERS B/C AXES DIRECT PATH MEASURING SYSTEM-
Input Resolution.............................................. 0.001 mm
-EQUIPPED WITH-
Fully enclosed protection cabin
BLUM Laser tool measuring in machining area:
Automatic withdrawal of the measuring unit in a protected housing
Tool length & tool diameter measuring in both horizontal/vertical
Preparation for Renishaw MP 10 infrared measuring probe
Spray pistol with pump 14.5 psi/10.4 gpm (1 bar/40 l/min)
Production package consisting of:
-Coolant tank 160 gallon (600 l) with automatic gap sieve cleaning
-580 PSI (40 bar) coolant thru the spindle form AD
-Chip conveyor
-Rotating clear-view window on side window