5-AXIS MACHINING CENTERS
DMG MORI DECKEL MAHO DMU 50 eVolution | |||
---|---|---|---|
Manufacturer: | DMG MORI | Model: | DECKEL MAHO DMU 50 eVolution |
Inventory Number: | 064274 | Year: | 2004 |
Status: | Available | Date Sold: | -- |
Location: | On Our Floor | Number of Axis: | Full 5-Axis |
Tool Changer: | 32 ATC | Control: | HH Millplus iT |
Spindle: | 18,000 rpm | Spindle Taper: | CAT 40 |
X Axis: | 19.7" (500 mm) | A Axis: | -- |
Y Axis: | 16.5" (420 mm) | B Axis: | 0-180 degrees |
Z Axis: | 15" (380 mm) | C Axis: | 360 x 0.001 degrees |
5-AXIS MACHINING CENTERS
DECKEL MAHO DMU 50 eVolution
Subject to availability, prior sale, and terms and conditions of standard sales contract, we offer for your consideration:
One used 2003 DMG MORI DECKEL MAHO DMU 50 eVolution 5-Axis simultaneous machining center
-Clamp once, machine 5-Sides-
Table on machine swivels 0-180 degrees and rotates 360 degrees which allows for high speed 5-Sided 5-Axis simultaneous machining with one work piece clamping
Build date for this machine: March 2003
Machine first installed new in the USA: June 2004
Machine was made in Seebach, Germany at DECKEL MAHO-Seebach
HEIDENHAIN Millplus IT control with electronic hand wheel and Ethernet interface
-With 2nd processor card
Work Area
Traverse path X (longitudinal): 19.7” (500 mm)
Traverse path Y (across): 16.5” (420 mm)
Traverse path Z (vertical): 15” (380 mm)
Main Drive
AC-motor spindle drive power 100% DC: 33.5 HP (25 kW)
AC-motor spindle drive power 40% DC: 46.9 HP (35 kW)
Spindle speed: 20-18,000 rpm
Maximum spindle torque: 95.9 Ft/Lbs (130 Nm)
Spindle taper: CAT 40
Number of gear steps: None
Spindle bearing diameter: 3.15” (80 mm)
Feed Drives
Rapid traverse linear axes X/Y/Z: 1,968.5 ipm (50 m/min)
Feed velocity linear axes X/Y/Z: 787.4 ipm (20 m/min)
Tool Magazine
Storage pockets: 32 positions
Maximum tool weight: 13.22 lbs (6 kg)
Max. tool diameter without vacant places: 3.15” (80 mm)
Max. tool diameter with vacant places: 4.13” (105 mm)
Maximum tool length: 11.02” (280 mm)
Chip to chip time: Approximately 6 seconds
Flood Coolant
Amount of coolant: 52.8 gallons (200 l)
Flow rate: 5.28 gallon/minute (20 l/minute)
NC-Swivel Rotary Table
Clamping surface: 19.7” x 15.0” (500 x 380 mm)
Swivel range (swivel) B-axis: 0-180 degrees
Swivel range (rotary) C-axis: 0-360 degrees
Rapid traverse, (swivel) B-axis: 26 rpm
Rapid traverse, (rotary) C-axis: 33 rpm
Maximum table load: 441 lbs (200 kg)
Table measuring system: Direct path measuring system in both axes
Table cooling: Drive cooling for B and C axis with heat exchanger
Table swivel time, horizontal/vertical: Approximately 1.5 seconds
Equipped With
BLUM Laser tool measuring of tool length and diameter, also with broken tool detection
HEIDENHAIN infrared parts measuring probe
Production Package which consists of:
-580 PSI (40 Bar) coolant thru the spindle with 238 gallon (900 liter) coolant tank
-Air purge for linear measuring system
-Chip conveyor
Heidenhain glass scales (direct path measuring system) X Y Z B C
Machine Dimensions
Machine length: Approximately 140”
Machine width: Approximately 88”
Machine height: Approximately 97”
Machine weight: Approximately 12,566 lbs (5700 kg)