5-AXIS MACHINING CENTERS
DMG MORI DECKEL MAHO DMU 80 monoBLOCK | |||
---|---|---|---|
Manufacturer: | DMG MORI | Model: | DECKEL MAHO DMU 80 monoBLOCK |
Inventory Number: | 064249 | Year: | 2007 |
Status: | Available | Date Sold: | -- |
Location: | On Our Floor | Number of Axis: | Full 5-Axis |
Tool Changer: | 32 ATC | Control: | HH iTNC 530 |
Spindle: | 10,000 rpm | Spindle Taper: | CAT 40 |
X Axis: | 34.65" (880 mm) | A Axis: | -- |
Y Axis: | 24.80" (630 mm) | B Axis: | -120/+30 degrees |
Z Axis: | 24.80" (630 mm) | C Axis: | 360 x 0.001 degrees simultaneous |
5-AXIS MACHINING CENTERS
DECKEL MAHO DMU 80 monoBLOCK
SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:
Used 2007 DECKEL MAHO DMG-DMU 80monoBLOCK Full 5-Axis Machining Center:
Machine made in Pfronten, Germany-Full 5-Axis Simultaneous!
Heidenhain iTNC530 CNC control with 15" TFT screen & Electronic Handwheel
-WORKING RANGE-
Traverse path X axis (longitudinal).................... 34.65" (880 mm)
Traverse path Y axis (transverse)...................... 24.80" (630 mm)
Traverse path Z axis (vertical)........................ 24.80" (630 mm)
-MAXIMUM WORK PIECE DIMENSIONS-
34.65" (880 mm) diameter x 30.71" (780 mm) height x 1,433lb (650 kg)weight
-FEED DRIVES-
Type.............................................. Brushless AC/Digital
Rapid traverse linear axes X/Y/Z.................. 1,181 ipm (30 m/min)
Ballscrews X/Y/Z...................... 50 x 20 mm/50 x 20 mm/63 x 20 mm
-TOOL MAGAZINE-
Application................................................... Vertical
Type of Gripper................................................ Pick Up
Number of Tool Stations............................................. 32
Max Tool Weight........................................ 17.6 lbs (8 kg)
Max Tool Diameter without free side pockets.............. 3.15" (80 mm)
Max Tool Diameter with free side pockets................ 5.12" (130 mm)
Max Tool Length......................................... 12.4" (315 mm)
-HEIDENHAIN GLASS SCALES X/Y/Z AXES DIRECT PATH MEASURING SYSTEM-
Input Resolution.............................................. 0.001 mm
-HEIDENHAIN ROTARY ENCODERS B/C AXES DIRECT PATH MEASURING SYSTEM-
Input Resolution.............................................. 0.001 mm
-EQUIPPED WITH-
Fully enclosed protection cabin
Integrated NC Rotary Table 4th Axis
Table Clamping Surface................... 27.56" (700 mm) Diameter
Maximum Table Load............................. 1,433 lbs (650 kg)
Rigid Table Clamping Surface.. 49.21" x 27.56" (1,250 mm x 700 mm)
Maximum Table Revolution................................... 30 rpm
10,000 RPM Motor Spindle with Active Cooling
Type of Main Drive.......................... AC controlled digital
Drive Power 100% DC................................. 40 HP (30 kW)
Drive Power 40% DC.................................. 27 HP (20 kW)
Max Spindle Torque 100% DC.................... 141 Ft/Lb. (191 Nm)
Max Spindle Torque 40% DC..................... 211 Ft/Lb. (286 Nm)
Speed Range......................................... 20-10,000 RPM
Acceleration from 0-18,000 RPM.......................... 4 Seconds
Number of gear steps......................................... None
Spindle Taper.............................................. CAT 40
Spindle bearing diameter front/rear........ 3.15"/3.15" (80/80 mm)
NC-Controlled Swivel Milling Head (B-Axis) 5th Axis with Active Cooling
Swivel Range 150 Degrees(0 is Vertical/-90 is Horizontal) -120/+30Degrees
Rapid traverse of the B-Axis is 35 rpm, swivelling time approx. 1.5 sec
158 gallon (600 liter) high pressure coolant tank with paper band filter
580 PSI (40 bar) coolant thru the spindle centre
Chip conveyor
External flood coolant on outside of spindle
14.5 PSI (1 bar) pressure, 10.6 gallon/min (40 l/min) flow rate
Infrared parts measuring touch probe
Weight of machine approximately 20,062 lbs (9,100 kg)
Total load at machine base including workpiece weight approx 22,046 lbs
Approximately 4,200 original spindle on hours total!