5-AXIS MACHINING CENTERS
| +GF+ MIKRON MIKRON HPM 450U | |||
|---|---|---|---|
| Manufacturer: | +GF+ MIKRON | Model: | MIKRON HPM 450U |
| Inventory Number: | 064202 | Year: | 2013 |
| Status: | Available | Date Sold: | -- |
| Location: | On Our Floor | Number of Axis: | Full 5-Axis |
| Tool Changer: | 60 ATC | Control: | HH iTNC 530 |
| Spindle: | 20,000 rpm | Spindle Taper: | HSK-A 63 |
| X Axis: | 23.62" (600 mm) | A Axis: | -- |
| Y Axis: | 17.72" (450 mm) | B Axis: | -120/+45 degrees |
| Z Axis: | 17.72" (450 mm) | C Axis: | 360 x 0.001 degrees |
5-AXIS MACHINING CENTERS
MIKRON HPM 450U
SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:
ONE USED 2013 MIKRON GFMS-HPM 450U 5-AXIS AUTOMATED MACHINING CENTER:
Machine made in Nidau, Switzerland, inspect under power on our floor in WI
-CONTROL-
Heidenhain iTNC 530 with Ethernet and electronic handwheel for part setup
-WORKING RANGE-
Longitudinal X-Axis.................................... 23.62" (600 mm)
Transverse Y-Axis...................................... 17.72" (450 mm)
Vertical Z-Axis........................................ 17.72" (450 mm)
-ROTARY TILTING TORQUE MOTOR TABLE-
Tilt, B-Axis.......................................... -120/+45 degrees
Rotary, C-Axis......................................... n x 360 degrees
Feed/Rapid Speed B-Axis......................................... 50 rpm
Feed/Rapid Speed C-Axis........................................ 140 rpm
Pallet Version System 3R Dynafix 280 mm x 280 mm (11.02" x 11.02") Pallets
Maximum Weight On Table 150 kg (331 lbs) manual; 90 kg (198 lbs) automatic
Automatic Pallet Changer 7 Pallets capacity(No pallets come with machine)
Max pallet size possible for this machine 350 mm x 350 mm (13.8" x 13.8")
-FEED DRIVES-
Feed Rate X/Y/Z..................................... 590 IPM (15 m/min)
Rapid Speed X/Y/Z................................... 866 IPM (22 m/min)
-STEPTEC SWISS MADE SPINDLE-
Spindle taper.................................................. HSK-A63
Spindle RPM................................................. 20,000 RPM
Spindle power.......................................... 40.2 HP (30 kW)
Spindle torque...................................... 67.1 Ft/Lb (91 Nm)
-60 POSITION TOOL CHANGER-
Automatic Tool Changer..................................... 60 position
-EQUIPPED WITH-
Complete machine enclosure
Pallet changer Dynafix 280x280
Spindle chiller
Direct measuring system Heidenhain glass scales X/Y/Z, Encoders B,C
60 position tool changer
18-70 bar (261 PSI-1,015 PSI) Coolant Thru The Spindle
Paper band micro filter system 650 liter (172 gallon) capacity tank
BLUM laser tool measuring of tool length and diameter
M&H Infrared Parts Measuring Touch Probe
Lift-up Chip Conveyor
Spray Gun
Beacon
Blow-off unit for laser measuring system
All feed motors are liquid-cooled
Electric oil mist extractor