UNIVERSAL MACHINING CENTERS
| DECKEL MAHO DMG-DMU80T | |||
|---|---|---|---|
| Manufacturer: | DECKEL MAHO | Model: | DMG-DMU80T |
| Inventory Number: | 064200 | Year: | 2003 |
| Status: | Available | Date Sold: | -- |
| Location: | On Our Floor | Number of Axis: | Full 4/5-Axis |
| Tool Changer: | 32 ATC | Control: | HH Millplus iT |
| Spindle: | 12,000 rpm | Spindle Taper: | HSK-A 63 |
| X Axis: | 34.6" (880 mm) | A Axis: | -- |
| Y Axis: | 24.8" (630 mm) | B Axis: | +12.1/-91.1 degrees |
| Z Axis: | 24.8" (630 mm) | C Axis: | -- |
UNIVERSAL MACHINING CENTERS
DMG-DMU80T
SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS
FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:
One used 2003 DECKEL MAHO DMG-DMU80T 4-AXIS Universal Machining Center:
Machine made in Pfronten, Germany
HEIDENHAIN Millplus iT control with 15" TFT screen & Electronic Handwheel
-WORK AREA-
Traverse path X (longitudinal).......................... 34.6" (880 mm)
Traverse path Y (across)................................ 24.8" (630 mm)
Traverse path Z (vertical).............................. 24.8" (630 mm)
-FEED DRIVES-
Type.............................................. Brushless AC/Digital
Rapid traverse linear axes X/Y/Z.................. 1,181 ipm (30 m/min)
Ballscrews X/Y/Z...................... 50 x 20 mm/50 x 20 mm/63 x 20 mm
-TOOL MAGAZINE-
Application................................................... Vertical
Type of Gripper................................................ Pick Up
Number of Tool Stations............................................. 32
Max Tool Weight........................................ 17.6 lbs (8 kg)
Max Tool Diameter without free side pockets.............. 3.15" (80 mm)
Max Tool Diameter with free side pockets................ 5.12" (130 mm)
Max Tool Length......................................... 12.4" (315 mm)
-HEIDENHAIN GLASS SCALES X/Y/Z AXES DIRECT PATH MEASURING SYSTEM-
Input Resolution.............................................. 0.001 mm
-HEIDENHAIN ROTARY ENCODERS B/C AXES DIRECT PATH MEASURING SYSTEM-
Input Resolution.............................................. 0.001 mm
-EQUIPPED WITH-
Fully enclosed protection cabin
Rigid Table
Rigid Table Clamping Surface.... 49.2" x 27.6" (1,250 mm x 700 mm)
Rigid Table maximum load....................... 1,543 lbs (700 kg)
12,000 RPM Motor Spindle with Active Cooling
Type of Main Drive............................................. AC
Drive Power 100% DC............................... 13.4 HP (10 kW)
Drive Power 40% DC................................ 20.1 HP (15 kW)
Max Spindle Torque 100% DC.................... 64.2 Ft/Lb. (87 Nm)
Max Spindle Torque 40% DC.................... 95.9 Ft/Lb. (130 Nm)
Speed Range......................................... 20-12,000 RPM
Acceleration from 0-12,000 RPM.......................... 2 Seconds
Number of gear steps......................................... None
Spindle Taper.............................................. HSK-63
Spindle bearing diameter front/rear........ 3.15"/2.16" (80/55 mm)
NC-CONTROLLED B-AXIS SWIVEL MILLING HEAD for 5-Axis simultaneous
machining in combination with an optional NC sub-table. If the NC
sub-table is mounted vertically it is an A-Axis. If mounted horizontally
it is a C-Axis.
-FULL contouring programmable B-Axis
-With active cooling
-Swivel range + (0 is vertical) +12.1 degrees clockwise past vertical
-Swivel range - (0 is vertical) -91.1 degrees counter clockwise past horiz
BLUM Laser tool measuring tool length, diameter & broken tool detection
RENISHAW infrared parts measuring probe
Chip auger
External flood coolant on outside of spindle
1 bar (14.5 PSI) pressure, 40L/Min (10.6 gallon/min) flow rate
250L (66 gallon) capacity coolant tank
Electric oil mist extractor
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
NOTES:
This machine is TWO machines in one: both a Horizontal Machining Center
AND a Vertical Machining Center because of the automatic universal swivel
milling head enabling both vertical & horizontal machining with 1 clamping
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<