VERTICAL MACHINING CENTERS
| RODERS RXP 400 | |||
|---|---|---|---|
| Manufacturer: | RODERS | Model: | RXP 400 |
| Inventory Number: | 064165 | Year: | 2012 |
| Status: | Available | Date Sold: | -- |
| Location: | On Our Floor | Number of Axis: | 3-Axis |
| Tool Changer: | 18 ATC | Control: | RMS6 CNC |
| Spindle: | 40,000 rpm | Spindle Taper: | HSK-E32 |
| X Axis: | 16.1" (410 mm) | A Axis: | -- |
| Y Axis: | 11.8" (300 mm) | B Axis: | -- |
| Z Axis: | 8.3" (210 mm) | C Axis: | -- |
VERTICAL MACHINING CENTERS
RXP 400
SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:
One used 2012 ROEDERS RXP 400 High Speed 3-Axis Vertical Machining Center:
Machine built in Soltau, Germany in 2012; first installed new in US 3/2013
-BASE MACHINE, INCLUDING THE FOLLOWING-
High speed milling machine with high stiffness for highest precision and
surface quality in three linear axes. The NC control has been developed
especially for high dynamics in 3D milling operations.
Patented friction-freee weight counterbalance in the Z-axis for optimal
precision.
Intel Pentium based Roeders High Speed CNC control RMS6
Work-piece table with T slot configuration
Spindle 3000 to 40,000 RPM, type MFW1024/40 HSK-E32
-Includes automatic tool change capability
-Maximum tool diameter 0.400in (10 mm)
-Includes greased bearings with automatic lubrication
-Fully integrated into machine control
-Equipped for HSK 32 tool interface
Laser tool length measuring device
-For automatic tool length, diameter, custom taper and contour measurement
with breakage and wear control
-Fully integrated into RMS6 CNC control
-Safely hidden in sealed tool changer compartment
Automatic tool cleaning station
-Compressed air-blast cleaning of cutting tool before laser measurement
-Tool moves to the cleaning station automatically when the CLEAN cycle is
programmed
Work piece cleaning
-Pressure air jet for cleaning of the work piece by air, integrated into
the Z-axis
Hand held pendant
-For manual operation of the axes during set-up, includes override control
RMSEdit
-Program editor for modifying and creating NC programs
-Includes the following features: Syntax highlighting, tool for file
comparison, tool for simple file modification, special search functions
-Ethernet network connection
-1GBit/sec; Interface for the integration of the machine control into an
Ethernet-network by the customer
Chip Removal
-Collecting bin below the machine bed
Automatic tool changer, RXP400
-Tool changer capacity: 18 positions, HSK 32. Includes collision detection
Rotary door for the tool changer
-Rotary door for the tool changer for manual tool change during production
time
3-D Touch Probe (Manual)
-Fixture with collet for probe and reference pin included
Automation package (RXP200-600)
-Includes automatic door for robot loading and un-loading
-Includes DIO card for connection to an external loading system
RMSMain/RXP
-Includes Roeders Job Manager (standard version) for the operation of a
single machine, with or without handling for tools and workpieces
RMS6-PH/Wp
-Includes software interface for connecting the Roeders machine control
(RMS6) to an external handling system from: Roeders, System 3R, Erowa,
Fanuc, and Zimmer+Kreim
-Includes the following interfaces: Work piece changing is possible with
a single gripper
High Accuracy Package
-Measurement of spindle growth with non-contact sensor
-Fully integrated into the machine control
Chuck drive single-2 pieces
-Includes pneumatic control of a single automatic chuck with clamping
check, chuck needs to be ordered through Roeders. When a handling system
is used, the chuck will be controlled by the handling system
-MACHINE DESCRIPTION-
Work Envelope
X axis.................................................. 16.1" (410 mm)
Y axis.................................................. 11.8" (300 mm)
Z axis................................................... 8.3" (210 mm)
Table Dimensions
X....................................................... 17.1" (450 mm)
Y....................................................... 11.8" (300 mm)
Max. Workpiece Weight
220 lbs. (100 kg)
Axis Drive Motors
Linear Motors in all three axis, water cooled
Guideways
Deutsche Starr super precision linear guides with recirculating roller
bearings, standard cooling of bearings
Feedrates
0-1575 IPM (40M/min) on all 3 axes
Machine Weight
7,040 lbs. (3,200 kg)
Machine Dimensions (including control cabinet)
8' wide, 6.3' deep, 6.8' high
Max. Ambient Temperature Allowed
95 degrees F
Sealing
All machine components are protected against contamination. With an
industrial vacuum cleaner, graphite, cast iron and plastic can be
machined
Cabin
Fully enclosed, two doors with safety glass, good view into the working
area, simple work piece loading by crane is possible. For the automated
loading of the machine an automatic door is available on request
Cooling
Chiller for tempering of the spindle, drives and cabinet
-CONTROL DESCRIPTION-
PC based control uses two Pentium 3.2 GHz level computers
17" flat screen monitor
Control operates under Windows XP
Easy to learn, user friendly Windows interface
1 Gigabyte RAM (more RAM available on request)
250 Gigabyte hard drive (larger drives available on request)
Industry leading 10,000 block look ahead
CNC control automatically assign best acceleration/deceleration based on
cutter path geometry
Standard CNC can control up to 5 axes simultaneously
PLC interface allows for easy connection of accessories
Software axis limit switches
Built in "post" postprocessor allows Roeders control to run CAM files
configured for other machines control formats without requiring
"reposting" for Roeders format
User can control which G and M codes to disregard when running part files
Machine history file stores ongoing machine history information: name of
file run, when it was run, total run time, error codes, etc.
Automatic 2D cutter radius compensation with collision detection
Automatic 3D cutter radius compensation (CAD file must give XYZ of tool
tip and tool vector)
Automatic sister tool function changes tools during operation (based in
cut distance)
NOTE: ROBOT SHOWN IN PHOTOS DOES NOT COME WITH THE MACHINE!
NOTE: PRICE QUOTED IN UNITED STATES DOLLARS