5-AXIS MACHINING CENTERS
| DECKEL MAHO DMG-DMU 50 eVolution | |||
|---|---|---|---|
| Manufacturer: | DECKEL MAHO | Model: | DMG-DMU 50 eVolution |
| Inventory Number: | 064057 | Year: | 2000 |
| Status: | Sold | Date Sold: | 08/2016 |
| Location: | On Our Floor | Number of Axis: | 5-Axis |
| Tool Changer: | 60 ATC | Control: | Millplus |
| Spindle: | 18,000 rpm | Spindle Taper: | CAT 40 |
| X Axis: | 19.7" (500 mm) | A Axis: | -- |
| Y Axis: | 16.5" (420 mm) | B Axis: | 0-180 degrees |
| Z Axis: | 15" (380 mm) | C Axis: | 360 x 0.001 degrees |
5-AXIS MACHINING CENTERS
DMG-DMU 50 eVolution
SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:
Used 2000 DECKEL MAHO DMG-DMU 50 eVolution 5-Axis Vertical Machining Center:
Made in Seebach, Germany
Build Date........................................................ 2000
-Clamp once, machine 5-Sides-
Table on machine swivels 0-180 degrees and rotates 360 degrees which
allows for 5-Axis simultaneous machining with one work piece clamping.
Heidenhain Millplus CNC control, 420 SW level, with electronic handwheel
-WORK AREA-
Traverse path X (longitudinal).......................... 19.7" (500 mm)
Traverse path Y (across)................................ 16.5" (420 mm)
Traverse path Z (vertical)................................ 15" (380 mm)
-MAIN DRIVE-
AC-motor spindle drive power 100% DC................... 33.5 HP (25 kW)
AC-motor spindle drive power 40% DC.................... 46.9 HP (35 kW)
Spindle speed............................................ 20-18,000 rpm
Spindle taper................................................... CAT 40
Number of gear steps.............................................. None
Max Spindle Torque................................ 95.9 Ft/Lbs (130 Nm)
Spindle Bearing Diameter................................. 3.15" (80 mm)
-FEED DRIVES-
Rapid traverse linear axes X/Y/Z................ 1,968.5 ipm (50 m/min)
Feed Range linear axes X/Y/Z...................... 787.4 ipm (20 m/min)
-TOOL MAGAZINE-
Storage pockets........................................... 60 positions
Maximum tool weight................................... 13.22 lbs (6 kg)
Maximum tool diameter without vacant places.............. 3.15" (80 mm)
Maximum tool diameter with vacant places................ 4.13" (105 mm)
Maximum tool length.................................... 11.02" (280 mm)
Chip to chip time.............................. Approximately 6 seconds
-FLOOD COOLANT-
Amount of coolant................................. 52.8 gallons (200 l)
Flow rate............................. 5.28 gallon/minute (20 l/minute)
-MEASURING SYSTEM-
Direct, Heidenhain glass scales, resolution 0.00004" for X/Y/Z
Heidenhain direct angle encoders for B & C Axes
-NC SWIVEL ROTARY TABLE-
Clamping surface.......................... 19.7" x 15.0" (500 x 380 mm)
Swivel range 5th (swivel) B-axis......................... 0-180 degrees
Rotation range 4th (rotary) C-axis 0-360 degrees (continous, full 4th)
Rapid traverse, (swivel) B-axis................................. 26 rpm
Rapid traverse, (rotary) C-axis................................. 33 rpm
Maximum table load.................................... 441 lbs (200 kg)
Table measuring system....... Direct path measuring system in both axes
Table cooling....... Drive cooling for B and C axis with heat exchanger
Table swivel time, horizontal/vertical....... Approximately 1.5 seconds
-EQUIPPED WITH-
BLUM laser tool measuring of tool length, diameter,& broken tool detection
PRODUCTION PACKAGE consisting of:
580 PSI (40 Bar) Coolant Thru the Spindle
Chip Conveyor
Visiport inspection window on front door of machine