HERMLE C30U dynamic 5-Axis with 75 ATC

Inventory Number: 064435

Subject to availability, and terms & conditions of FRANKE CNC sales agreement, we offer for your consideration:

One used 2004 HERMLE C30U dynamic Full 5-Axis Simultaneous Gantry Style VMC:

May be inspected under power in our Wisconsin showroom by appointment. Fly into MKE or ORD.

Machine was produced in the Black Forest at Maschinenfabrik Berthold Hermle AG-Gosheim, Germany in 10/2004. Sold by HERMLE as a demo machine and first installed new in the USA in 2006.

Ran by only one master machinist on ultra high precision prototype parts.

Approximately 10,594 original SPINDLE ON hours total-over the life of the machine.

This is the equivalent of approximately 5 years of use on a 1-shift basis.

HEIDENHAIN iTNC 530 CNC Control with hand-held electronic handwheel control unit

TECHNICAL DATA:

X-Axis.................................................   25.6" (650 mm)

Y-Axis.................................................   23.6" (600 mm)

Z-Axis.................................................   19.7" (500 mm)

Spindle speed range......................................   20-18,000 rpm

Machine equipped with external spindle chiller

Spindle taper..................................................   HSK-A63

Spindle output...........................................   20 HP (15 kW)

Spindle torque.......................................   96 lb/ft (130 Nm)

Spindle diameter at the front bearings...................   2.76" (70 mm)

Tool Changer.....................................   32 tool pockets plus additional magazine 43 pockets=75 ATC total

NC swivelling rotary table diameter.....................   11.02" (280 mm)

NC swivelling rotary table Fixture Table maximum swing…….32” (813 mm) not included

Load capacity of NC swivelling rotary table...........   661 lbs (300 kg)

Table C-axis rotation range........   360 x 0.001 degrees (Full 4th axis)

Table A-axis swivel range    230 degrees: +/- 115 degrees (Full 5th axis)

Speed of the tilting A-axis (dynamic).....................................   55 rpm

Speed of the rotary C-axis......................................   40 rpm

Holding torque A-axis (dynamic)……………………..2,766 lb/ft (3,750 Nm)

Clamping torque C-axis……………………………….2,213 lb/ft (3,000 Nm)

T grooves in table………………………………………14 H7 (4 pcs-star type)

Central boring…………………………………………Diameter 32 H7

DYNAMIC FEED DRIVE

Feed force…………………………………………….1,574 lb/ft (7,000 N)

Rapid traverse………………………………………...1,772 ipm (45 m/min)

Acceleration……………………………………………236 inch/sec-2 (6 m/sec-2)

Diameter and pitch of the feed spindles:

X-axis 40/15 mm

Y-axis 50/25 mm

Z-axis 40/25 mm

Tool change time approximately 5.5 seconds chip to chip

EQUIPPED WITH:

Mineral casting machine base

Approximate machine weight 20,944 lb (9,500 kg)

A axis dynamic

HEIDENHAIN linear glass scales direct measuring in X/Y/Z Axes resolution 0.1 u

HEIDENHAIN rotary encoders direct measuring in 4th and 5th Axes resolution 0.1 u

Coolant tank unit

Scraper chip conveyor

Machine light

Fully enclosed cabin enclosure

Spindle air blast

Orientation spindle stop M19

Helical interpolation

Rigid tapping

RS 232 port and Ethernet port

RENISHAW infrared parts measuring touch probe

BLUM laser tool measuring of tool length, diameter, and broken tool detection

Electronic Temperature Compensation

Leveling Shoes

Ball Bar Test-at inspection

Geometry Test-at inspection

Spray pistol

Adapter for oil mist extractor

Electrical preparation for oil mist extractor

Linear scale air protection

PREP. CTS (HSKA63/18.000) Preparation for coolant thru the spindle

Books, manuals and technical documentation on hand for the machine

CONNECTION REQUIREMENTS:

Power input: 400V/60 Hz

Power required: 43 KVA

Air required: 87 PSI (6 bar)

Price quoted in United States Dollars                                     

Purchase Point is Hartland, Wisconsin 53029

To the best of our knowledge all details listed above are deemed correct. It is the Buyer's responsibility to confirm all details including condition, capacity, suitability or performance and we encourage an under power inspection of the machine(s) and accessories prior to purchase.       

PRICE QUOTED IS FOB OPEN TOP TRUCK - PURCHASE POINT, PLUS STATE & LOCAL TAXES, IF APPLICABLE.

This quote is valid for 1 week from today’s date.