+GF+ MIKRON HSM 600U
+GF+ MIKRON HSM 600U
orCall +1 262-320-3399
Description
5-AXIS MACHINING CENTERS
HSM 600U
SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:
One used 2011 MIKRON HSM600U 5-AXIS Machining Center with 7 X Pallet Chngr:
Machine was manufactured in Nidau, Switzerland
CONTROL
Heidenhain iTNC 530 with Ethernet and electronic handwheel for part setup
WORKING RANGE
FEED DRIVE
DIRECT DRIVE WORK TABLE
Maximum workpiece weight (automatic with pallet changer) 198 lbs (90 kg)
Max pallet size possible for this machine 13.8" x 13.8" (350 x 350 mm)
Pallet type this machine is equipped with System 3R Dynafix 280 x 280 mm
NOTE optional pallets sized 350 x 350 mm NOT included with this machine
With hydraulic clamping in turning and swivelling axis
All feed motors are liquid-cooled
Direct measuring system Heidenhain rotary encoders
AUTOMATION
WEIGHT
SPINDLE
EQUIPPED WITH:
153 gallon (580 l) coolant Tank with paper filtration system & 70 bar CTS
Chip conveyor for higher demands
Tool cleaning by air blast
Direct measuring system Heidenhain glass scales X/Y/Z
Specifications
| Manufacturer | +GF+ MIKRON |
| Model | HSM 600U |
| Year | 2011 |
| Condition | Used |
| Stock Number | 064225 |
| Status | Available |
| Number of axis | Full 5-Axis |
| Tool changer | 50 ATC |
| Control | HH iTNC 530 |
| Spindle | 24,000 rpm |
| Spindle taper | HSK A63 |
| X axis | 31.5" (800 mm) |
| Y axis | 23.6" (600 mm) |
| B axis | +30/-110 degrees |
| Z axis | 19.7" (500 mm) |
| C axis | 360 x 0.001 degrees |
| Longitudinal x-axis | 31.5" (800 mm) |
| Cross y-axis | 23.6" (600 mm) |
| Vertical z-axis | 19.7" (500 mm) |
| B-axis (swivel) | +30/-110 degrees |
| C-axis (rotary) | n x 360 degrees |
| Number of simultaneous axis | 5/5 simultaneous |
| Feed rate x/y/z | 1,653 IPM (42 m/min) |
| Feed rate b-axis (swivel) | 200 RPM |
| Feed rate c-axis (rotary) | 360 RPM |
| Acceleration x/y/z | up to 17 m/sec2 |
| Pallet clamping surface | 11.02" x 11.02" (280 mm x 280 mm) pallets |
| Maximum workpiece weight (manual loading) | 264 lbs (120 kg) |
| Number of pallets this machine is equipped with | 7 pallets |
| Tool magazine automatic tool changer | 50 positions |
| Laser tool measuring system | Standard |
| Infrared parts measuring touch probe | M&H |
| Automatic pallet changer number of pallets | 7 pallets |
| Including pallet changer | Approximately 20,282 lbs (9,200 kg) |
| Machine base | Polymer concrete (man made granite) |
| Spindle rpm | 24,000 RPM |
| Spindle power 40% ed | 29.5 HP (22 kW) |
| Spindle torque 40% ed | 33.9 Ft/Lb (46 Nm) |