5-AXIS MACHINING CENTERS

DMG MORI DECKEL MAHO DMC200U
Manufacturer: DMG MORI Model: DECKEL MAHO DMC200U
Inventory Number: 064340 Year: 2003
Status: Available Date Sold: --
Location: In Plant Under Power Number of Axis: 5-Axis
Tool Changer: 120 ATC Control: SIEMENS 840D
Spindle: 10,000 rpm Spindle Taper: HSK-A 100
X Axis: 70.87" (1,800 mm) A Axis: -10 to +120 degrees
Y Axis: 78.74" (2,000 mm) B Axis: --
Z Axis: 43.31" (1,100 mm) C Axis: 360 x 0.001 degrees

5-AXIS MACHINING CENTERS
DECKEL MAHO DMC200U


SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS
FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:
Used 2003 DMG MORI DECKEL MAHO DMC200U Gantry Style 5-Axis UMC w/2 Pallets:

 

 
                                                                          
*May be inspected in US plant under power by appointment*                 
                                                                          
Machine was built at DECKEL MAHO Pfronten in Germany                      
                                                                          
This machine is capable of simultaneous 5-axis and 5-sided machining      
because of the universal swivel head which moves continuously between     
vertical and horizontal spindle positions with a controlled A-axis        
                                                                          
SIEMENS 840D Powerline control with electronic handwheel                  
                                                                          
-WORKING RANGE-                                                           
X axis (longitudinal)................................   70.87" (1,800 mm)
Y axis (transverse)..................................   78.74" (2,000 mm)
Z axis (vertical)....................................   43.31" (1,100 mm)
Volume machining area........................................   3,960 dm3
                                                                          
-WORKING TABLE (2 x T-slot PALLETS) NC ROTARY TABLE-                      
NC rotary table clamping surface    62.99" x 55.12" (1,600 mm x 1,400 mm)
NC rotary table maximum load......................   7,716 lbs (3,500 kg)
Rotation range of table............   360 x 0.001 degrees (full 4th axis)
                                                                          
-5th AXIS MILLING SPINDLE-                                                
NC Controlled A-axis milling head. 2 seconds swivel time Horiz.-Vertical  
Head swivels from horizontal to vertical & vertical to horizontal position
In addition head has a NC Controlled swivel angle from vertical position  
0 degrees to the front 30 degrees past horizontal, 10 degrees to the back 
in the direction of the gantry Z-axis-130 degrees in total  (-10/+120)    
                                                                          
-MAIN SPINDLE DRIVE-                                                      
Type.............................................   AC controlled/digital
Power 40% duty cycle (S3)................................   59 HP (44 kW)
Power 100% duty cycle (S1).............................   42.9 HP (32 kW)
Speed range (spindle).....   20-10,000 rpm, no gear steps (motor spindle)
Maximum spindle torque..............................   212 lb ft (288 Nm)
Spindle bearing diameter front..........................   3.94" (100 mm)
Spindle taper.................................................   HSK-A100
Clamping power...................................................   15 kN
Swivel moment milling spindle (100% duty cycle)    5,554 lb/ft (7,530 Nm)
Holding moment (40% duty cycle).................   6,144 lb/ft (8,330 Nm)
Swivel time from vertical to horizontal & horizontal to vertical    2 sec.
Positional uncertainty: P (VDI/DGQ 3441).....................   9 arc sec
                                                                          
-FEED DRIVES-                                                             
Type..............................................   Brushless AC/Digital
Feed rate...............................   0.04-590 IPM (1-15,000 mm/min)
Rapid feed (x-y-z)......   2,362 IPM-1,574 IPM-1,574 IPM (60-40-40 m/min)
Acceleration (x-y-z).......................................   6/4/4 m/s-2
Feed power (x-y-z)...............................................   15 kN
Ballscrews x/y/z..................................   63x30/80x30/63x30 mm
                                                                          
-120 POSITION VERTICAL CHAIN STYLE TOOL CHANGER-                          
Number of pockets..................................................   120
Maximum tool weight......................................   44 lb (20 kg)
Maximum tool diameter without free pockets..............   4.33" (110 mm)
Maximum tool diameter with free pockets.................   9.05" (230 mm)
Maximum tool length....................................   17.72" (450 mm)
                                                                          
-COOLANT PUMP-                                                            
Pump output external jets........   15.85 gallon/minute (60 liter/minute)
Pump pressure external jets........................   21.76 PSI (1.5 bar)
Pump output chip rinsing........   47.55 gallon/minute (180 liter/minute)
Tank volume.....................................   238 gallon (900 liter)
                                                                          
-COOLANT THRU THE SPINDLE-                                                
Pressure..............................................   580 PSI (40 bar)
                                                                          
-WEIGHT-                                                                  
Machine weight with table and pallet changer......   77,600 lbs (38.8 to)
Load on machine base including 2 x workpiece weight    83,600 lbs (41.8 to)
                                                                          
-EQUIPPED WITH-                                                           
Automatic pallet changer with 2 pallets total                             
                                                                          
BLUM Laser tool length measuring and broken tool detection                
                                                                          
RENISHAW MP700 infrared parts measuring probe